AG Chacer

These are the instructions to download Flash or install Stock Firmware (ROM) on AG Chacer (Original firmware) , If you searching for the AG Chacer Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on AG Chacer , Here you can download the Official AG Chacer Stock Firmware ROM (flash file) on your Computer

Download AG Chacer Stock Rom (Original firmware)

Requirements: Your AG Chacer Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: AG_Chacer_MT6572_4.4.2-[flash-file.net].zip
Flash File Size: 535 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on AG Chacer

To install the Stock Firmware on AG Chacer , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on AG Chacer .

STEP 1: Download and Install the AG Chacer USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your AG Chacer device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On AG Chacer STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On AG ChacerHow To Flash Stock Rom Firmware On AG Chacer

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On AG Chacer STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On AG Chacer STEP 9: After completed all the above steps, connect your AG Chacer to your system using the USB cable and , press any button other than power button so that your system will detect your AG Chacer Device. You can use volume buttons. How To Flash Stock Rom Firmware On AG Chacer How To Flash Stock Rom Firmware On AG Chacer Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your AG Chacer and switch it ON.How To Flash Stock Rom Firmware On AG ChacerHow To Flash Stock Rom Firmware On AG ChacerCongratulations, Now you have successfully flashed the stock firmware on your AG Chacer using SP Flash Tool.

Keep in mind:

[*] AG Chacer Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing AG Chacer Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT AG Chacer:If you would like to know how to root your AG Chacer android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On AG Chrome GoTab 7.0

AG Chrome GoTab 7.0

These are the instructions to download Flash or install Stock Firmware (ROM) on AG Chrome …

Leave a Reply

%d bloggers like this: