Home / Azumi / Azumi Iro A4Q Telcel

How To Flash Stock Rom Firmware On Azumi Iro A4Q Telcel

These are the instructions to download Flash or install Stock Firmware (ROM) on Azumi Iro A4Q Telcel (Original firmware) , If you searching for the Azumi Iro A4Q Telcel Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Azumi Iro A4Q Telcel , Here you can download the Official Azumi Iro A4Q Telcel Stock Firmware ROM (flash file) on your Computer.

DownloadAzumi Iro A4Q Telcel Stock Rom (Original firmware)

Requirements: Your Azumi Iro A4Q Telcel Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Azumi_Iro_A4Q_Telcel_6.0-[flash-file.net].zip
Flash File Size: 976 MB
Flash Tool Link: SPD Flash Tool

Password to Extract: flash-file.net

Download Flash File


Flash File Name: Azumi_Iro_A4_Q_MT6580_6.0.zip
File SiG5e]: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Azumi Iro A4Q Telcel

To install the Stock Firmware on the Azumi Iro A4Q Telcel , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Azumi Iro A4Q Telcel .

STEP 1: Download and Install the Azumi Iro A4Q Telcel USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Azumi Iro A4Q Telcel device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Azumi Iro A4Q Telcel to your system using the USB cable and , press any button other than power button so that your system will detect your Azumi Iro A4Q Telcel Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Azumi Iro A4Q Telcel and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Azumi Iro A4Q Telcel using SP Flash Tool.

Keep in mind:

[*] Azumi Iro A4Q Telcel Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Azumi Iro A4Q Telcel Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Azumi Iro A4Q Telcel Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Azumi Iro A4Q Telcel:If you would like to know how to root your Azumi Iro A4Q Telcel android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Azumi A40C Claro

These are the instructions to download Flash or install Stock Firmware (ROM) on Azumi A40C …

Leave a Reply

Your email address will not be published. Required fields are marked *