Home / Byond / Byond Nano Plus

How To Flash Stock Rom Firmware On Byond Nano Plus

These are the instructions to download Flash or install Stock Firmware (ROM) on Byond Nano Plus (Original firmware) , If you searching for the Byond Nano Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Byond Nano Plus , Here you can download the Official Byond Nano Plus Stock Firmware ROM (flash file) on your Computer

Download Byond Nano Plus Stock Rom (Original firmware)

Requirements: Your Byond Nano Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Byond_Nano_Plus_20062013_SPD-[flash-file.net].zip
Flash File Size: 3 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Byond Nano Plus

To install the Stock Firmware on Byond Nano Plus , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Byond Nano Plus .

Step 1: Download and Install Byond Nano Plus USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Byond Nano Plus Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Byond Nano Plus Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Byond Nano Plus is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Byond Nano Plus Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Byond Nano Plus using Spreadtrum Upgrade Tool. Once your Byond Nano Plus Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Byond Nano Plus using Spreadtrum Upgrade Tool

Keep in mind:

[*] Byond Nano Plus Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Byond Nano Plus Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Byond Nano Plus:If you would like to know how to root your Byond Nano Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Byond B60

These are the instructions to download Flash or install Stock Firmware (ROM) on Byond B60 …

Leave a Reply

Your email address will not be published.