How to Flash Coolpad 8670 Stock Firmware using YGDP Tool
Want to Install Stock ROM On Coolpad 8670 ? If you own a Coolpad 8670 smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock Rom on Coolpad 8670 smartphone. This guide is simple and easy to follow. We have listed the Official Stock Rom for Coolpad 8670 below. Download the required file to either upgrade or downgrade your Coolpad 8670. This guide is followed by the YGDP Tool method which is simple and easy. You can just flash firmware on Coolpad 8670 using the YGDP Tool method. Follow the steps carefully to flash the firmware on Coolpad 8670 using the guide.
Guide To flash Official Stock ROM On Coolpad 8670
Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your Coolpad 8670 smartphone. You can anytime flash the stock Rom on Coolpad 8670. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Coolpad 8670 lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your device.
The Advantage Of Coolpad 8670 Stock Firmware:
- Flash Stock To Unbrick your Coolpad 8670
- Flash Stock ROM to Fix the Bootloop problem1
- Upgrade and Downgrade Coolpad 8670
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Coolpad 8670
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
READ THIS CAUTION:
So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Coolpad 8670.
Download Coolpad 8670 Stock Firmware (Original flash file):-
Flash Coolpad 8670 Stock Firmware using YGDP Tool:-
Step 1: Download and install the Coolpad 8670 USB Drivers on your Computer. If Android Drivers is already installed on your computer then Skip this Step.
- Step 2: Download and install YGDP Tool on your computer.
- Step 3: Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).
Step 4: Once YGDP Flashing Tool is launched, you will be able to see the following screen: Step 5: Now, enter the Password 369 or 9527 and click on Login button. Step 6: Once you are able to see the main screen of YGDP Tool, then click on the Configbutton. Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your Coolpad 8670 Device): Step 8: Now, Click on the Apply button. Step 9: Now, connect your Coolpad 8670 Device to the computer (make sure it is power off and battery installed). Step 10: Now, click on the Start Button to begin the flashing. Step 11: Once Flashing is completed you will be able to see green Upgrade Successful message.
Congratulations, Now you have successfully flashed the stock firmware on your Coolpad 8670 using YGDP Tool
Flash Coolpad 8670 Stock Firmware using YGDP Tool (video):-
- [*] Take Backup: Take a Phone backup before using the YGDP Flashing Tool as because during the flashing process your personal data will be removed.
- [*] Always press volume up key from the Coolpad 8670 and connect to the computer then start the flashing process.
- [*] Compatibility issue: If YGDP Tool doesnt work in Windows 7, Windows 8 or Windows 10, in that situation right click on the YGDP_Assembly.exe > Properties > Run this Program in compatibility mode for Windows XP.
- [*] Credits: YGDP tool is created by Coolpad Inc, so full credits goes to them for the tool.