Home / CoolPad / Coolpad 9970

How To Flash Stock Rom Firmware On Coolpad 9970

These are the instructions to download Flash or install Stock Firmware (ROM) on Coolpad 9970 (Original firmware) , If you searching for the Coolpad 9970 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Coolpad 9970 , Here you can download the Official Coolpad 9970 Stock Firmware ROM (flash file) on your Computer

Download Coolpad 9970 Stock Rom (Original firmware)

Requirements: Your Coolpad 9970 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Coolpad_9970_4.2.190.P2.141222.9970_China_4.2.2-[flash-file.net].zip
Flash File Size: 622 MB
Flash Tool Link: YGDP Tool

Download Flash File

How to Flash Stock Firmware ROM on Coolpad 9970

To install the Stock Firmware on Coolpad 9970 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Coolpad 9970 .

Step 1: Download and install the Coolpad 9970 USB Drivers on your Computer. If Android Drivers is already installed on your computer then Skip this Step. Step 2: Download and install YGDP Tool on your computer.  

Step 3: Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Step 4: Once YGDP Flashing Tool is launched, you will be able to see the following screen: Step 5: Now, enter the Password 369 or 9527 and click on Login button. Step 6: Once you are able to see the main screen of YGDP Tool, then click on the Config button. Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your Coolpad 9970 Device): Flash Official Stock ROM On Android Device Step 8: Now, Click on the Apply button. Step 9: Now, connect your Coolpad 9970 Device to the computer (make sure it is power off and battery installed). Step 10: Now, click on the Start Button to begin the flashing.

  Step 11: Once Flashing is completed you will be able to see green Upgrade Successful message. Flash Official Stock ROM On Android Device Congratulations, Now you have successfully flashed the stock firmware on your Coolpad 9970 Lite using YGDP Tool

Keep in mind:

[*] Coolpad 9970 Flash Tool: If you need to download the latest version of YGDP Flash Tool, then head over to YGDP Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Coolpad 9970 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Coolpad 9970:If you would like to know how to root your Coolpad 9970 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

CoolPad 7295C

These are the instructions to download Flash or install Stock Firmware (ROM) on CoolPad 7295C …

Leave a Reply

Your email address will not be published. Required fields are marked *