These are the instructions to download Flash or install Stock Firmware (ROM) on Coolpad E503 (Original firmware) , If you searching for the Coolpad E503 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Coolpad E503 , Here you can download the Official Coolpad E503 Stock Firmware ROM (flash file) on your Computer
Download Coolpad E503 Stock Rom (Original firmware)
Requirements: Your Coolpad E503 Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Coolpad E503
To install the Stock Firmware on Coolpad E503 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Coolpad E503 .
STEP 1: Download and Install the Coolpad E503 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Coolpad E503 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Coolpad E503 to your system using the USB cable and , press any button other than power button so that your system will detect your Coolpad E503 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Coolpad E503 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Coolpad E503 using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Coolpad E503 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Coolpad E503:If you would like to know how to root your Coolpad E503 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .