How To Flash Stock Rom Firmware On Coolpad NX1

These are the instructions to download Flash or install Stock Firmware (ROM) on Coolpad NX1 (Original firmware) , If you searching for the Coolpad NX1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Coolpad NX1 , Here you can download the Official Coolpad NX1 Stock Firmware ROM (flash file) on your Computer

Download Coolpad NX1 Stock Rom (Original firmware)

Requirements: Your Coolpad NX1 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Coolpad_NX1_MT6735_29062017_5.1-[flash-file.net].zip
Flash File Size: 954 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Coolpad NX1

To install the Stock Firmware on Coolpad NX1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Coolpad NX1 .

STEP 1: Download and Install the Coolpad NX1 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Coolpad NX1 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Coolpad NX1 to your system using the USB cable and , press any button other than power button so that your system will detect your Coolpad NX1 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Coolpad NX1 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Coolpad NX1 using SP Flash Tool.

Keep in mind:

[*] Coolpad NX1 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Coolpad NX1 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Coolpad NX1:If you would like to know how to root your Coolpad NX1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .