Home / CoolPad / Coolpad Roar 5 E2C

How To Flash Stock Rom Firmware On Coolpad Roar 5 E2C

These are the instructions to download Flash or install Stock Firmware (ROM) on Coolpad Roar 5 E2C (Original firmware) , If you searching for the Coolpad Roar 5 E2C Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Coolpad Roar 5 E2C , Here you can download the Official Coolpad Roar 5 E2C Stock Firmware ROM (flash file) on your Computer

Download Coolpad Roar 5 E2C Stock Rom (Original firmware)

Requirements: Your Coolpad Roar 5 E2C Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Coolpad_Roar_5_E2C_180102_7.1.1_QFIL-[flash-file.net].zip
Flash File Size: 971 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Coolpad Roar 5 E2C

To install the Stock Firmware on Coolpad Roar 5 E2C , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Coolpad Roar 5 E2C .

Step 1: Donload and install Coolpad Roar 5 E2C USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Coolpad Roar 5 E2C device. Step 6: Once your Coolpad Roar 5 E2C device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Coolpad Roar 5 E2C device will be reboot automatically. Thats It, We are done!. Now disconnect your Coolpad Roar 5 E2C device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Coolpad Roar 5 E2C using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Coolpad Roar 5 E2C Flash Tool: If you need to download the latest version of QPST Flash Tool, then head over to QPST Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Coolpad Roar 5 E2C Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Coolpad Roar 5 E2C:If you would like to know how to root your Coolpad Roar 5 E2C android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

CoolPad 7295C

These are the instructions to download Flash or install Stock Firmware (ROM) on CoolPad 7295C …

Leave a Reply

Your email address will not be published. Required fields are marked *