Home / CoolPad / Coolpad Y60-C1

How To Flash Stock Rom Firmware On Coolpad Y60-C1

These are the instructions to download Flash or install Stock Firmware (ROM) on Coolpad Y60-C1 (Original firmware) , If you searching for the Coolpad Y60-C1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Coolpad Y60-C1 , Here you can download the Official Coolpad Y60-C1 Stock Firmware ROM (flash file) on your Computer

Download Coolpad Y60-C1 Stock Rom (Original firmware)

Requirements: Your Coolpad Y60-C1 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Coolpad_Y60_C1_4.3.009.P1.141028-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: Qcom Dloader Tool

Download Flash File

How to Flash Stock Firmware ROM on Coolpad Y60-C1

To install the Stock Firmware on Coolpad Y60-C1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Coolpad Y60-C1 .

Step 1: Download and extract QcomDloader Tool on your computer. After extracting, you will be able to see the following files: qcomdloader file Step 2: Now, Install the Coolpad Y60-C1 USB Driver on your Computer (if you have already installed the Coolpad Y60-C1 USB Driver on your computer then SKIP this step). qcomdloader driver Step 3: Once you have successfully installed the Qualcomm USB Driver, then Connect your Coolpad Y60-C1 device to the computer (using USB cable). Connect Android Device with Computer Step 4: Once your Coolpad Y60-C1 is connected to the computer, Open QcomDloader.exe. qcomdloader open Step 5: Once, QcomDloader Tool is launched, you will be able to see the following interface: Step 6: Now, Click on the Load Button and locate the Coolpad Y60-C1 Firmware of your Device. Step 7: Now, Click on the Settings Button and Select Download Mode as Upgrade. Step 8: Under Download Settings, Tick Validate Downloaded ROM. Step 9: Now, Leave the eMMC Programmer, Raw program, Patch0 Box

as it is. But, you may need to change it, if the name of respected file is not same as written in the Box. For example:

If you Open the Qualcomm Firmware Folder (assuming you have already downloaded the firmware), you will find various files of which 3 main files are read by QcomDloader to Flash the extire package i.e prog_emmc_firehose_8916.mbn, rawprogram_unparse.xml, patch0.xml. If in case the eMMC file name is different, then simply write the exact name in QcomDloader, so that it can recoginize the firmware.

Step 10: Now, Under chipset ID write the Chipset number (here eMMC file name if prog_emmc_firehose_8916.mbn of which 8926 is the Chipset ID). Step 11: Now, Click OK to exit the configuration interface. Step 12: Now, Click on Start Button to begin the Flashing process. Step 13: Once, Flashing is completed you will be able to see Green Passed message.

Congratulations, Now you have successfully flashed the stock firmware on your Coolpad Y60-C1 using QcomDloader Tool.

Keep in mind:

[*] Qcom Dloader Tool]: If you need to download the latest version of Qcom Dloader Tool, then head over to Qcom Dloader Tool .

[*] Backup Please: Take a backup of your important data before Flashing Coolpad Y60-C1 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Coolpad Y60-C1:If you would like to know how to root your Coolpad Y60-C1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

CoolPad 7295C

These are the instructions to download Flash or install Stock Firmware (ROM) on CoolPad 7295C …

Leave a Reply

Your email address will not be published. Required fields are marked *