How To Flash Stock Rom Firmware On Cross L1X
These are the instructions to download Flash or install Stock Firmware (ROM) on Cross L1X (Original firmware) , If you searching for the Cross L1X Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cross L1X , Here you can download the Official Cross L1X Stock Firmware ROM (flash file) on your Computer
Download Cross L1X Stock Rom (Original firmware)
Requirements: Your Cross L1X Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Cross_L1X_A206_v1.9_20120703_SPD-[flash-file.net].zip
Flash File Size: 3 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Cross L1X
To install the Stock Firmware on Cross L1X , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cross L1X .
Step 1: Download and Install Cross L1X USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Cross L1X Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Cross L1X Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Cross L1X is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Cross L1X Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. 
Step 9: Now you have successfully flashed your Cross L1X using Spreadtrum Upgrade Tool. Once your Cross L1X Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Cross L1X using Spreadtrum Upgrade Tool
Keep in mind:
[*] Cross L1X Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Cross L1X Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Cross L1X:If you would like to know how to root your Cross L1X android device, drop a comment below. We will share the tutorial for your device as quickly as possible .