These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot Echo 6061C (Original firmware) , If you searching for the Cubot Echo 6061C Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot Echo 6061C , Here you can download the Official Cubot Echo 6061C Stock Firmware ROM (flash file) on your Computer
Download Cubot Echo 6061C Stock Rom (Original firmware)
Requirements: Your Cubot Echo 6061C Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Cubot Echo 6061C
To install the Stock Firmware on Cubot Echo 6061C , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot Echo 6061C .
STEP 1: Download and Install the Cubot Echo 6061C USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Cubot Echo 6061C device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Cubot Echo 6061C to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot Echo 6061C Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot Echo 6061C and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Cubot Echo 6061C using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Cubot Echo 6061C Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Cubot Echo 6061C:If you would like to know how to root your Cubot Echo 6061C android device, drop a comment below. We will share the tutorial for your device as quickly as possible .