Home / Cubot / Cubot J3

How To Flash Stock Rom Firmware On Cubot J3

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot J3 (Original firmware) , If you searching for the Cubot J3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot J3 , Here you can download the Official Cubot J3 Stock Firmware ROM (flash file) on your Computer

Download Cubot J3 Stock Rom (Original firmware)

Requirements: Your Cubot J3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Cubot_J3_MT6580_20180525_8.1.0-[flash-file.net].zip
Flash File Size: 612 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Cubot J3

To install the Stock Firmware on Cubot J3 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot J3 .

STEP 1: Download and Install the Cubot J3 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Cubot J3 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Cubot J3 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Cubot J3How To Flash Stock Rom Firmware On Cubot J3

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Cubot J3 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Cubot J3 STEP 9: After completed all the above steps, connect your Cubot J3 to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot J3 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Cubot J3 How To Flash Stock Rom Firmware On Cubot J3 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot J3 and switch it ON.How To Flash Stock Rom Firmware On Cubot J3How To Flash Stock Rom Firmware On Cubot J3Congratulations, Now you have successfully flashed the stock firmware on your Cubot J3 using SP Flash Tool.

Keep in mind:

[*] Cubot J3 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Cubot J3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Cubot J3:If you would like to know how to root your Cubot J3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Cubot C9W

Cubot C9W

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot C9W …

Leave a Reply

%d bloggers like this: