Cubot Note Plus 7151C

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot Note Plus 7151C (Original firmware) , If you searching for the Cubot Note Plus 7151C Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot Note Plus 7151C , Here you can download the Official Cubot Note Plus 7151C Stock Firmware ROM (flash file) on your Computer

Download Cubot Note Plus 7151C Stock Rom (Original firmware)

Requirements: Your Cubot Note Plus 7151C Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Cubot_Note_Plus_7151C_MT6737T_V07_20171015-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Cubot_Note_Plus_7151C_MT6737T_V09_20171210-[flash-file.net].zip
Flash File Size: 852 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Cubot Note Plus 7151C

To install the Stock Firmware on Cubot Note Plus 7151C , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot Note Plus 7151C .

STEP 1: Download and Install the Cubot Note Plus 7151C USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Cubot Note Plus 7151C device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Cubot Note Plus 7151C STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Cubot Note Plus 7151CHow To Flash Stock Rom Firmware On Cubot Note Plus 7151C

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Cubot Note Plus 7151C STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Cubot Note Plus 7151C STEP 9: After completed all the above steps, connect your Cubot Note Plus 7151C to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot Note Plus 7151C Device. You can use volume buttons. How To Flash Stock Rom Firmware On Cubot Note Plus 7151C How To Flash Stock Rom Firmware On Cubot Note Plus 7151C Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot Note Plus 7151C and switch it ON.How To Flash Stock Rom Firmware On Cubot Note Plus 7151CHow To Flash Stock Rom Firmware On Cubot Note Plus 7151CCongratulations, Now you have successfully flashed the stock firmware on your Cubot Note Plus 7151C using SP Flash Tool.

Keep in mind:

[*] Cubot Note Plus 7151C Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Cubot Note Plus 7151C Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Cubot Note Plus 7151C:If you would like to know how to root your Cubot Note Plus 7151C android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Cubot C9W

Cubot C9W

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot C9W …

Leave a Reply

%d bloggers like this: