These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot P10 (Original firmware) , If you searching for the Cubot P10 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot P10 , Here you can download the Official Cubot P10 Stock Firmware ROM (flash file) on your Computer
Download Cubot P10 Stock Rom (Original firmware)
Requirements: Your Cubot P10 Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Cubot P10
To install the Stock Firmware on Cubot P10 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot P10 .
STEP 1: Download and Install the Cubot P10 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Cubot P10 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Cubot P10 to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot P10 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot P10 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Cubot P10 using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Cubot P10 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Cubot P10:If you would like to know how to root your Cubot P10 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .