Home / Cubot / Cubot R11

How to Flash /Install (Software) Cubot R11 firmware (Stock ROM)

How to Flash Cubot R11 Stock Firmware using Smart Phone Flash Tool

Want to Install Stock ROM On Cubot R11 ? If you own a Cubot R11 smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock Rom on Cubot R11 smartphone. This guide is simple and easy to follow. We have listed the Official Stock Rom for Cubot R11 below. Download the required file to either upgrade or downgrade your Cubot R11. This guide is followed by the SP Flash Tool method which is simple and easy. You can just flash firmware on Cubot R11 using the Smart Phone Flash Tool method. Follow the steps carefully to flash the firmware on Cubot R11 using the guide.

We ask you to read the steps before doing something wrong. “READ READ READ” Once you are done! Now you can download the SP Flas h Tool , USB Drivers and the stock Rom from the below Pre-Requisite note.

Guide To flash Official Stock ROM On Cubot R11

Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your Cubot R11 smartphone. You can anytime flash the stock Rom on Cubot R11. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Cubot R11 lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your device.

To install the Stock Firmware on Cubot R11, Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot R11 smartphone.

The Advantage Of Cubot R11 Stock Firmware:

  • Flash Stock To Unbrick your Cubot R11
  • Flash Stock ROM to Fix the Bootloop problem1
  • Upgrade and Downgrade Cubot R11
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Cubot R11
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Cubot R11.

Download Cubot R11 Stock Firmware (Original flash file):-

Download Stock Firmware Rom

Flash Cubot R11 Stock Firmware using Smart Phone Flash Tool:-

  • STEP 1: Download and Install Cubot R11 USB Drivers on your computer. In case you have already installed them, you can skip this step.
  • STEP 2: Switch Off your android device .
  • STEP 3: After downloading Cubot R11 Stock Firmware , extract the zip file on your system.
  • STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How to Flash Cubot R11 Stock ROM Firmware

STEP 5: Form the files listed run the Flash_tool.exe file.

How to Flash Cubot R11 Stock ROM FirmwareHow to Flash Cubot R11 Stock ROM Firmware

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How to Flash Cubot R11 Stock ROM Firmware

  • STEP 7: Now locate the scatter file in your Cubot R11 stock ROM. It is generally located in the bin/ directory.
  • STEP 8: Now click the Download button to start the downloading process.

How to Flash Cubot R11 Stock ROM Firmware STEP 9: After completed all the above steps, connect your Cubot R11 Device to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot R11 Device. You can use volume buttons. How to Flash Cubot R11 Stock ROM Firmware How to Flash Cubot R11 Stock ROM Firmware Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot R11 Device and switch it ON.How to Flash Cubot R11 Stock ROM FirmwareHow to Flash Cubot R11 Stock ROM Firmware

Congratulations, Now you have successfully flashed the stock firmware on your Cubot R11 using Smart Phone Flash Tool (SP Flash Tool)

Flash Cubot R11 Stock Firmware using SP Flash Tool (video):-

Keep in mind:

  • [*] The above tutorial only works with Cubot R11 Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).
  • [*] Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.
  • [*] How to Flash IMEI: After flashing the firmware on your Cubot R11 Mediatek Device, maybe you need to follow How to Flash IMEI using SN Write Tool to fix the IMEI on your Android Device.
Our Score
Our Reader Score
[Total: 0 Average: 0]

Check Also

How to Flash Cubot X16 Stock ROM Firmware

Cubot X16

How to Flash Cubot X16 Stock Firmware using Smart Phone Flash Tool Want to Install …

Leave a Reply

Your email address will not be published. Required fields are marked *