Cubot X16

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot X16 (Original firmware) , If you searching for the Cubot X16 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot X16 , Here you can download the Official Cubot X16 Stock Firmware ROM (flash file) on your Computer

Download Cubot X16 Stock Rom (Original firmware)

Requirements: Your Cubot X16 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Cubot_X16_V04_20150908-[flash-file.net].zip
Flash File Size: 769 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Cubot_X16_V13_20151215-[flash-file.net].zip
Flash File Size: 810 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Cubot X16

To install the Stock Firmware on Cubot X16 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot X16 .

STEP 1: Download and Install the Cubot X16 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Cubot X16 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Cubot X16 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Cubot X16How To Flash Stock Rom Firmware On Cubot X16

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Cubot X16 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Cubot X16 STEP 9: After completed all the above steps, connect your Cubot X16 to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot X16 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Cubot X16 How To Flash Stock Rom Firmware On Cubot X16 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot X16 and switch it ON.How To Flash Stock Rom Firmware On Cubot X16How To Flash Stock Rom Firmware On Cubot X16Congratulations, Now you have successfully flashed the stock firmware on your Cubot X16 using SP Flash Tool.

Keep in mind:

[*] Cubot X16 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Cubot X16 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Cubot X16:If you would like to know how to root your Cubot X16 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Cubot C9W

Cubot C9W

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot C9W …

Leave a Reply

%d bloggers like this: