Cubot X18 Plus

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot X18 Plus (Original firmware) , If you searching for the Cubot X18 Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cubot X18 Plus , Here you can download the Official Cubot X18 Plus Stock Firmware ROM (flash file) on your Computer

Download Cubot X18 Plus Stock Rom (Original firmware)

Requirements: Your Cubot X18 Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Cubot_X18_Plus_MT6750_V23_20180424-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Cubot_X18_Plus_MT6750_20180524_8.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Cubot_X18_Plus_MT6750_20180709_8.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Cubot X18 Plus

To install the Stock Firmware on Cubot X18 Plus , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cubot X18 Plus .

STEP 1: Download and Install the Cubot X18 Plus USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Cubot X18 Plus device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Cubot X18 Plus STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Cubot X18 PlusHow To Flash Stock Rom Firmware On Cubot X18 Plus

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Cubot X18 Plus STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Cubot X18 Plus STEP 9: After completed all the above steps, connect your Cubot X18 Plus to your system using the USB cable and , press any button other than power button so that your system will detect your Cubot X18 Plus Device. You can use volume buttons. How To Flash Stock Rom Firmware On Cubot X18 Plus How To Flash Stock Rom Firmware On Cubot X18 Plus Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Cubot X18 Plus and switch it ON.How To Flash Stock Rom Firmware On Cubot X18 PlusHow To Flash Stock Rom Firmware On Cubot X18 PlusCongratulations, Now you have successfully flashed the stock firmware on your Cubot X18 Plus using SP Flash Tool.

Keep in mind:

[*] Cubot X18 Plus Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Cubot X18 Plus Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Cubot X18 Plus:If you would like to know how to root your Cubot X18 Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Cubot C10 Plus

Cubot C10 Plus

These are the instructions to download Flash or install Stock Firmware (ROM) on Cubot C10 …

Leave a Reply

%d bloggers like this: