Home / Datawind / DataWind Pocketsurfer GZ

How To Flash Stock Rom Firmware On DataWind Pocketsurfer GZ

These are the instructions to download Flash or install Stock Firmware (ROM) on DataWind Pocketsurfer GZ (Original firmware) , If you searching for the DataWind Pocketsurfer GZ Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on DataWind Pocketsurfer GZ , Here you can download the Official DataWind Pocketsurfer GZ Stock Firmware ROM (flash file) on your Computer

Download DataWind Pocketsurfer GZ Stock Rom (Original firmware)

Requirements: Your DataWind Pocketsurfer GZ Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: DataWind_Pocketsurfer_GZ_11012018_SPD-[flash-file.net].zip
Flash File Size: 7 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on DataWind Pocketsurfer GZ

To install the Stock Firmware on DataWind Pocketsurfer GZ , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on DataWind Pocketsurfer GZ .

Step 1: Download and Install DataWind Pocketsurfer GZ USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your DataWind Pocketsurfer GZ Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your DataWind Pocketsurfer GZ Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your DataWind Pocketsurfer GZ is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your DataWind Pocketsurfer GZ Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your DataWind Pocketsurfer GZ using Spreadtrum Upgrade Tool. Once your DataWind Pocketsurfer GZ Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your DataWind Pocketsurfer GZ using Spreadtrum Upgrade Tool

Keep in mind:

[*] DataWind Pocketsurfer GZ Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing DataWind Pocketsurfer GZ Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT DataWind Pocketsurfer GZ:If you would like to know how to root your DataWind Pocketsurfer GZ android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Datawind UbiSlate 9Ci

These are the instructions to download Flash or install Stock Firmware (ROM) on Datawind UbiSlate …

Leave a Reply

Your email address will not be published. Required fields are marked *