Home / Datawind / Datawind UbiSlate 9Ci

How To Flash Stock Rom Firmware On Datawind UbiSlate 9Ci

These are the instructions to download Flash or install Stock Firmware (ROM) on Datawind UbiSlate 9Ci (Original firmware) , If you searching for the Datawind UbiSlate 9Ci Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Datawind UbiSlate 9Ci , Here you can download the Official Datawind UbiSlate 9Ci Stock Firmware ROM (flash file) on your Computer

Download Datawind UbiSlate 9Ci Stock Rom (Original firmware)

Requirements: Your Datawind UbiSlate 9Ci Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Datawind_UbiSlate_9Ci-[flash-file.net].zip
Flash File Size: 336 MB
Flash Tool Link: RockChip Batch Tool

Download Flash File

How to Flash Stock Firmware ROM on Datawind UbiSlate 9Ci

To install the Stock Firmware on Datawind UbiSlate 9Ci , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Datawind UbiSlate 9Ci .

Step 1: Download and install Rockchip Driver Assistant on your computer. Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: Step 3: Now open RKBatchTool.exe from the extracted files. Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device   Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. Step 6: Now, Turn Off your Datawind UbiSlate 9Ci Device and tablets. Step 7: Now, Press and Hold Volume UP Key on your Datawind UbiSlate 9Ci Device and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your Datawind UbiSlate 9Ci Device until Icon 1 turns Green in Color. Guide To flash Official Stock ROM On Android Device Step 9: Once your Datawind UbiSlate 9Ci Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Datawind UbiSlate 9Ci Device (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. Guide To flash Official Stock ROM On Android Device Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

  Step 15: Disconnect your Datawind UbiSlate 9Ci Device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Datawind UbiSlate 9Ci using RockChip Batch Tool.

Keep in mind:

[*] Datawind UbiSlate 9Ci Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .

[*] Backup Please: Take a backup of your important data before Flashing Datawind UbiSlate 9Ci Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Datawind UbiSlate 9Ci:If you would like to know how to root your Datawind UbiSlate 9Ci android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Datawind PS5

These are the instructions to download Flash or install Stock Firmware (ROM) on Datawind PS5 …

Leave a Reply

Your email address will not be published. Required fields are marked *