These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss AT7H Plus (Original firmware) , If you searching for the Evercoss AT7H Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss AT7H Plus , Here you can download the Official Evercoss AT7H Plus Stock Firmware ROM (flash file) on your Computer
Download Evercoss AT7H Plus Stock Rom (Original firmware)
Requirements: Your Evercoss AT7H Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Evercoss AT7H Plus
To install the Stock Firmware on Evercoss AT7H Plus , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss AT7H Plus .
STEP 1: Download and Install the Evercoss AT7H Plus USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Evercoss AT7H Plus device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Evercoss AT7H Plus to your system using the USB cable and , press any button other than power button so that your system will detect your Evercoss AT7H Plus Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Evercoss AT7H Plus and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Evercoss AT7H Plus using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Evercoss AT7H Plus Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Evercoss AT7H Plus:If you would like to know how to root your Evercoss AT7H Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .