How To Flash Stock Rom Firmware On Evercoss J40A

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss J40A (Original firmware) , If you searching for the Evercoss J40A Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss J40A , Here you can download the Official Evercoss J40A Stock Firmware ROM (flash file) on your Computer

Download Evercoss J40A Stock Rom (Original firmware)

Requirements: Your Evercoss J40A Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_J40A_MT6572_V04_4.4_17092015-[flash-file.net].zip
Flash File Size: 300 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Evercoss J40A

To install the Stock Firmware on Evercoss J40A , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss J40A .

STEP 1: Download and Install the Evercoss J40A USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Evercoss J40A device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Evercoss J40A to your system using the USB cable and , press any button other than power button so that your system will detect your Evercoss J40A Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Evercoss J40A and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Evercoss J40A using SP Flash Tool.

Keep in mind:

[*] Evercoss J40A Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss J40A Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss J40A:If you would like to know how to root your Evercoss J40A android device, drop a comment below. We will share the tutorial for your device as quickly as possible .