How To Flash Stock Rom Firmware On Evercoss R40H

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss R40H (Original firmware) , If you searching for the Evercoss R40H Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss R40H , Here you can download the Official Evercoss R40H Stock Firmware ROM (flash file) on your Computer

Download Evercoss R40H Stock Rom (Original firmware)

Requirements: Your Evercoss R40H Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_R40H_V13_6_0_20160818-[flash-file.net].zip
Flash File Size: 757 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Evercoss R40H

To install the Stock Firmware on Evercoss R40H , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss R40H .

Step 1: Download and Install Evercoss R40H USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Evercoss R40H Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Evercoss R40H Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Evercoss R40H is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Evercoss R40H Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Evercoss R40H using Spreadtrum Upgrade Tool. Once your Evercoss R40H Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Evercoss R40H using Spreadtrum Upgrade Tool

Keep in mind:

[*] Evercoss R40H Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss R40H Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss R40H:If you would like to know how to root your Evercoss R40H android device, drop a comment below. We will share the tutorial for your device as quickly as possible .