Home / Evercoss / Evercoss U50C

How To Flash Stock Rom Firmware On Evercoss U50C

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss U50C (Original firmware) , If you searching for the Evercoss U50C Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss U50C , Here you can download the Official Evercoss U50C Stock Firmware ROM (flash file) on your Computer

Download Evercoss U50C Stock Rom (Original firmware)

Requirements: Your Evercoss U50C Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_U50C_MT6737M_V10_11052017_7.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Evercoss U50C

To install the Stock Firmware on Evercoss U50C , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss U50C .

STEP 1: Download and Install the Evercoss U50C USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Evercoss U50C device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Evercoss U50C to your system using the USB cable and , press any button other than power button so that your system will detect your Evercoss U50C Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Evercoss U50C and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Evercoss U50C using SP Flash Tool.

Keep in mind:

[*] Evercoss U50C Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss U50C Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss U50C:If you would like to know how to root your Evercoss U50C android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Evercoss A2

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss A2 …

Leave a Reply

Your email address will not be published. Required fields are marked *