Home / Evercoss / Evercoss U6 Prime

How To Flash Stock Rom Firmware On Evercoss U6 Prime

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss U6 Prime (Original firmware) , If you searching for the Evercoss U6 Prime Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss U6 Prime , Here you can download the Official Evercoss U6 Prime Stock Firmware ROM (flash file) on your Computer

Download Evercoss U6 Prime Stock Rom (Original firmware)

Requirements: Your Evercoss U6 Prime Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_U6_Prime_SC9850ka_03052018_8.1.0_SPD-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Evercoss U6 Prime

To install the Stock Firmware on Evercoss U6 Prime , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss U6 Prime .

Step 1: Download and Install Evercoss U6 Prime USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Evercoss U6 Prime Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Evercoss U6 Prime Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Evercoss U6 Prime is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Evercoss U6 Prime Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Evercoss U6 Prime using Spreadtrum Upgrade Tool. Once your Evercoss U6 Prime Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Evercoss U6 Prime using Spreadtrum Upgrade Tool

Keep in mind:

[*] Evercoss U6 Prime Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss U6 Prime Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss U6 Prime:If you would like to know how to root your Evercoss U6 Prime android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Evercoss A2

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss A2 …

Leave a Reply

Your email address will not be published. Required fields are marked *