Home / Gionee / Gionee M2017

How To Flash Stock Rom Firmware On Gionee M2017

These are the instructions to download Flash or install Stock Firmware (ROM) on Gionee M2017 (Original firmware) , If you searching for the Gionee M2017 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Gionee M2017 , Here you can download the Official Gionee M2017 Stock Firmware ROM (flash file) on your Computer

Download Gionee M2017 Stock Rom (Original firmware)

Requirements: Your Gionee M2017 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Gionee_M2017_MSM8952_6.0.1_QFIL-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Gionee M2017

To install the Stock Firmware on Gionee M2017 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Gionee M2017 .

Step 1: Donload and install Gionee M2017 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Gionee M2017 device. Step 6: Once your Gionee M2017 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Gionee M2017 device will be reboot automatically. Thats It, We are done!. Now disconnect your Gionee M2017 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Gionee M2017 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Gionee M2017 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Gionee M2017 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Gionee M2017:If you would like to know how to root your Gionee M2017 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Gionee E3

These are the instructions to download Flash or install Stock Firmware (ROM) on Gionee E3 …

Leave a Reply

Your email address will not be published.