Home / Haier / Haier HL-Y1

How To Flash Stock Rom Firmware On Haier HL-Y1

These are the instructions to download Flash or install Stock Firmware (ROM) on Haier HL-Y1 (Original firmware) , If you searching for the Haier HL-Y1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Haier HL-Y1 , Here you can download the Official Haier HL-Y1 Stock Firmware ROM (flash file) on your Computer

Download Haier HL-Y1 Stock Rom (Original firmware)

Requirements: Your Haier HL-Y1 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Haier_HL-Y1_MT6752_20151116_5.1-[flash-file.net].zip
Flash File Size: 733 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Haier HL-Y1

To install the Stock Firmware on Haier HL-Y1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Haier HL-Y1 .

STEP 1: Download and Install the Haier HL-Y1 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Haier HL-Y1 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Haier HL-Y1 to your system using the USB cable and , press any button other than power button so that your system will detect your Haier HL-Y1 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Haier HL-Y1 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Haier HL-Y1 using SP Flash Tool.

Keep in mind:

[*] Haier HL-Y1 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Haier HL-Y1 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Haier HL-Y1:If you would like to know how to root your Haier HL-Y1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Haier W718J

These are the instructions to download Flash or install Stock Firmware (ROM) on Haier W718J …

Leave a Reply

Your email address will not be published.