Home / Haier / Haier W861

How To Flash Stock Rom Firmware On Haier W861

These are the instructions to download Flash or install Stock Firmware (ROM) on Haier W861 (Original firmware) , If you searching for the Haier W861 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Haier W861 , Here you can download the Official Haier W861 Stock Firmware ROM (flash file) on your Computer

Download Haier W861 Stock Rom (Original firmware)

Requirements: Your Haier W861 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Haier_W861_4.4.2_20141105-[flash-file.net].zip
Flash File Size: 565 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Haier_W861_H01_S004_RU_20141022-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Haier W861

To install the Stock Firmware on Haier W861 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Haier W861 .

STEP 1: Download and Install the Haier W861 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Haier W861 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Haier W861 to your system using the USB cable and , press any button other than power button so that your system will detect your Haier W861 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Haier W861 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Haier W861 using SP Flash Tool.

Keep in mind:

[*] Haier W861 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Haier W861 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Haier W861:If you would like to know how to root your Haier W861 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Haier W718J

These are the instructions to download Flash or install Stock Firmware (ROM) on Haier W718J …

Leave a Reply

Your email address will not be published. Required fields are marked *