Home / Hello / Hello Smart 6

How To Flash Stock Rom Firmware On Hello Smart 6

These are the instructions to download Flash or install Stock Firmware (ROM) on Hello Smart 6 (Original firmware) , If you searching for the Hello Smart 6 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Hello Smart 6 , Here you can download the Official Hello Smart 6 Stock Firmware ROM (flash file) on your Computer

Download Hello Smart 6 Stock Rom (Original firmware)

Requirements: Your Hello Smart 6 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Hello_Smart_6_V1.4_160811_5.1-[flash-file.net].zip
Flash File Size: 646 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Hello Smart 6

To install the Stock Firmware on Hello Smart 6 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Hello Smart 6 .

STEP 1: Download and Install the Hello Smart 6 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Hello Smart 6 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Hello Smart 6 to your system using the USB cable and , press any button other than power button so that your system will detect your Hello Smart 6 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Hello Smart 6 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Hello Smart 6 using SP Flash Tool.

Keep in mind:

[*] Hello Smart 6 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Hello Smart 6 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Hello Smart 6:If you would like to know how to root your Hello Smart 6 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Hello Mate 2

These are the instructions to download Flash or install Stock Firmware (ROM) on Hello Mate …

Leave a Reply

Your email address will not be published. Required fields are marked *