Home / Huawei / Huawei Berlin-AL10A

How To Flash Stock Rom Firmware On Huawei Berlin-AL10A

These are the instructions to download Flash or install Stock Firmware (ROM) on Huawei Berlin-AL10A (Original firmware) , If you searching for the Huawei Berlin-AL10A Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Huawei Berlin-AL10A , Here you can download the Official Huawei Berlin-AL10A Stock Firmware ROM (flash file) on your Computer

Download Huawei Berlin-AL10A Stock Rom (Original firmware)

Requirements: Your Huawei Berlin-AL10A Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Huawei_Berlin-AL10A_C00B150_China_Nonspecific_EMUI4.1_05013QEU_6.0_Dload-[flash-file.net].zip
Flash File Size: 2 GB

Download Flash File


Flash File Name: Huawei_Berlin-AL10A_C00B172_China_Nonspecific_EMUI4.1_05013QEU_6.0_Dload-[flash-file.net].zip
Flash File Size: 2 GB

Download Flash File


Flash File Name: Huawei_Berlin-AL10A_C00B172_China_NonspecificEMUI4.1_05013QEU_6.0_Dload-[flash-file.net].zip
Flash File Size: 2 GB

Download Flash File


Flash File Name: Huawei_Berlin-AL10A_8.0.0.532_EMUI8.0_05014NVD_8.0_OTA-[flash-file.net].zip
Flash File Size: 2 GB
Flash-Guide: Copy update.zip to phone SD memory and flash it from recovery mode.

Download Flash File

How to Flash Stock Firmware ROM on Huawei Berlin-AL10A

To install the Stock Firmware on Huawei Berlin-AL10A , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Huawei Berlin-AL10A.

Step 1: Create a new folder on Huawei Berlin-AL10A Micro SD Card and rename it to dload.

huawei dload

Step 2: Download and extract firmware (for your Huawei Berlin-AL10A) on your Computer. After extracting you will be able to see these files:

huawei update app

Step 3: Now Copy UPDATE.APP and paste it the dload folder on your Micro SD card.

Step 4: Now Power Off your Huawei Berlin-AL10A Device.

 

Step 5: Now, Press Volume UP, Volume Down and Power Button at the same time for 5-8 seconds until the update process isnt started automatically.

Step 6: Update Process may takes 5-10 minutes to complete.

Step 7: Once Update Process is completed Huawei Berlin-AL10A device will reboot automatically and ready to use.

 

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Huawei Berlin-AL10A Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Huawei Berlin-AL10A:If you would like to know how to root your Huawei Berlin-AL10A android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Huawei Honor Holly U19

These are the instructions to download Flash or install Stock Firmware (ROM) on Huawei Honor …

Leave a Reply

Your email address will not be published. Required fields are marked *