These are the instructions to download Flash or install Stock Firmware (ROM) on I.N.Link Mars (Original firmware) , If you searching for the I.N.Link Mars Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on I.N.Link Mars , Here you can download the Official I.N.Link MarsStock Firmware ROM (flash file) on your Computer .
DownloadI.N.Link Mars Stock Rom (Original firmware)
Requirements: Your I.N.Link Mars Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: I.N.Link_Mars_V0.5_20170613_SPD-[flash-file.net].zip
Flash File Size: 466 MB
How to Flash Stock Firmware ROM on I.N.Link Mars
To install the Stock Firmware on I.N.Link Mars Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on I.N.Link Mars .
Step 1: Download and Install I.N.Link Mars USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your I.N.Link Mars Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your I.N.Link Mars Device to the computer (make sure your Android Device is switch off).
Step 6: Once your I.N.Link Mars is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your I.N.Link Mars Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your I.N.Link Mars using Spreadtrum Upgrade Tool. Once your I.N.Link Mars Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your I.N.Link Mars using Spreadtrum Upgrade Tool
Keep in mind:
[*] I.N.Link Mars Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing I.N.Link Mars Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT I.N.Link Mars:If you would like to know how to root your I.N.Link Mars android device, drop a comment below. We will share the tutorial for your device as quickly as possible .