Home / I.N.Link / I.N.Link Moon

How To Flash Stock Rom Firmware On I.N.Link Moon

These are the instructions to download Flash or install Stock Firmware (ROM) on I.N.Link Moon (Original firmware) , If you searching for the I.N.Link Moon Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on I.N.Link Moon , Here you can download the Official I.N.Link MoonStock Firmware ROM (flash file) on your Computer .

DownloadI.N.Link Moon Stock Rom (Original firmware)

Requirements: Your I.N.Link Moon Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: I.N.Link_Moon_MT6580_M02_20180125-[flash-file.net].zip
Flash File Size: 934 MB

Download Flash File

How to Flash Stock Firmware ROM on I.N.Link Moon

To install the Stock Firmware on I.N.Link Moon Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on I.N.Link Moon .

STEP 1: Download and Install the I.N.Link Moon USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your I.N.Link Moon device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On I.N.Link Moon STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On I.N.Link MoonHow To Flash Stock Rom Firmware On I.N.Link Moon

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On I.N.Link Moon STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On I.N.Link Moon STEP 9: After completed all the above steps, connect your I.N.Link Moon to your system using the USB cable and , press any button other than power button so that your system will detect your I.N.Link Moon Device. You can use volume buttons. How To Flash Stock Rom Firmware On I.N.Link Moon How To Flash Stock Rom Firmware On I.N.Link Moon Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your I.N.Link Moon and switch it ON.How To Flash Stock Rom Firmware On I.N.Link MoonHow To Flash Stock Rom Firmware On I.N.Link MoonCongratulations, Now you have successfully flashed the stock firmware on your I.N.Link Moon using SP Flash Tool.

Keep in mind:

[*] I.N.Link Moon Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing I.N.Link Moon Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT I.N.Link Moon:If you would like to know how to root your I.N.Link Moon android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On I.N.Link Sun

I.N.Link Sun

These are the instructions to download Flash or install Stock Firmware (ROM) on I.N.Link Sun …

Leave a Reply

%d bloggers like this: