Home / iBall / iBall Andi 3.5F Grabit

How To Flash Stock Rom Firmware On iBall Andi 3.5F Grabit

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Andi 3.5F Grabit (Original firmware) , If you searching for the iBall Andi 3.5F Grabit Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Andi 3.5F Grabit , Here you can download the Official iBall Andi 3.5F Grabit Stock Firmware ROM (flash file) on your Computer

Download iBall Andi 3.5F Grabit Stock Rom (Original firmware)

Requirements: Your iBall Andi 3.5F Grabit Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: iBall_Andi_3.5F_Grabit-[flash-file.net].zip
Flash File Size: 355 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on iBall Andi 3.5F Grabit

To install the Stock Firmware on iBall Andi 3.5F Grabit , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Andi 3.5F Grabit .

STEP 1: Download and Install the iBall Andi 3.5F Grabit USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your iBall Andi 3.5F Grabit device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iBall Andi 3.5F Grabit to your system using the USB cable and , press any button other than power button so that your system will detect your iBall Andi 3.5F Grabit Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iBall Andi 3.5F Grabit and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iBall Andi 3.5F Grabit using SP Flash Tool.

Keep in mind:

[*] iBall Andi 3.5F Grabit Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing iBall Andi 3.5F Grabit Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT iBall Andi 3.5F Grabit:If you would like to know how to root your iBall Andi 3.5F Grabit android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

iBall Slide i5715

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Slide …

Leave a Reply

Your email address will not be published. Required fields are marked *