These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Andi 3.5V Grabit 2 (Original firmware) , If you searching for the iBall Andi 3.5V Grabit 2 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Andi 3.5V Grabit 2 , Here you can download the Official iBall Andi 3.5V Grabit 2 Stock Firmware ROM (flash file) on your Computer
Download iBall Andi 3.5V Grabit 2 Stock Rom (Original firmware)
Requirements: Your iBall Andi 3.5V Grabit 2 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: iBall_Andi_3.5V_Grabit_2_V09_India-[flash-file.net].zip
Flash File Size: 139 MB
How to Flash Stock Firmware ROM on iBall Andi 3.5V Grabit 2
To install the Stock Firmware on iBall Andi 3.5V Grabit 2 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Andi 3.5V Grabit 2 .
Requirements: If you are using any Anti-Virus Application on your computer then Disable it or Uninstall it before following the tutorial below.
Step 1: Download and extract Piranha box Tool. After Extracting you will be able to see the following files: Step 2: Download the Stock Rom (bin format) that you want to Flash on your iBall Andi 3.5V Grabit 2 Device and extract it on your Computer.
Step 3: Now, Open Piranha_Box-V1.46_Crack_Only_DzCraXx.exe (you have extracted this in Step#1) on Your Computer. Step 4: Once Piranha box Tool is launched, Click on Chinese Tool Button. Step 5: Now, Under the Chinese Tools you will be able to see MTK Chipset Tool. Click on the Maximize Button. Step 6: In MTK Chipset Tool Select Write. Step 7: Now, Click on the Browse Button and locate the .bin firmware that you have downloaded in Step#3. Step 8: Now, Under Boot Select 8th Boot (mt65xx). Step 9: Now, Select USB Mode Button. Step 10: Now, Select Cable Name USB_(Cable&Mode). Step 11: Now, Connect your iBall Andi 3.5V Grabit 2 Device to the Computer (make sure it is power Off).
Step 12: Now, Click on the Start Button to Begin the Flashing Process. Step 13: Once Flashing is completed, you will be able to see Green Pass Status.
Step 14: Now, close Piranhabox Tool and disconnect your iBall Andi 3.5V Grabit 2 Device from the computer.
Congratulations, Now you have successfully flashed the stock firmware on your iBall Andi 3.5V Grabit 2 using Piranhabox Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing iBall Andi 3.5V Grabit 2 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT iBall Andi 3.5V Grabit 2:If you would like to know how to root your iBall Andi 3.5V Grabit 2 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .