Home / iBall / iBall Andi 4U Frisbee (8GB)

How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB)

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Andi 4U Frisbee (8GB) (Original firmware) , If you searching for the iBall Andi 4U Frisbee (8GB) Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Andi 4U Frisbee (8GB) , Here you can download the Official iBall Andi 4U Frisbee (8GB) Stock Firmware ROM (flash file) on your Computer

Download iBall Andi 4U Frisbee (8GB) Stock Rom (Original firmware)

Requirements: Your iBall Andi 4U Frisbee (8GB) Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: iBall_Andi_4U_Frisbee_8GB_V04_MT6582_20141218-[flash-file.net].zip
Flash File Size: 635 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on iBall Andi 4U Frisbee (8GB)

To install the Stock Firmware on iBall Andi 4U Frisbee (8GB) , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Andi 4U Frisbee (8GB) .

STEP 1: Download and Install the iBall Andi 4U Frisbee (8GB) USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your iBall Andi 4U Frisbee (8GB) device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB) STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB)How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB)

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB) STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB) STEP 9: After completed all the above steps, connect your iBall Andi 4U Frisbee (8GB) to your system using the USB cable and , press any button other than power button so that your system will detect your iBall Andi 4U Frisbee (8GB) Device. You can use volume buttons. How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB) How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB) Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iBall Andi 4U Frisbee (8GB) and switch it ON.How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB)How To Flash Stock Rom Firmware On iBall Andi 4U Frisbee (8GB)Congratulations, Now you have successfully flashed the stock firmware on your iBall Andi 4U Frisbee (8GB) using SP Flash Tool.

Keep in mind:

[*] iBall Andi 4U Frisbee (8GB) Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing iBall Andi 4U Frisbee (8GB) Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT iBall Andi 4U Frisbee (8GB):If you would like to know how to root your iBall Andi 4U Frisbee (8GB) android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On iBall Slide i5715

iBall Slide i5715

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Slide …

Leave a Reply

%d bloggers like this: