These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Andi 5L Rider (Original firmware) , If you searching for the iBall Andi 5L Rider Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Andi 5L Rider , Here you can download the Official iBall Andi 5L Rider Stock Firmware ROM (flash file) on your Computer
Download iBall Andi 5L Rider Stock Rom (Original firmware)
Requirements: Your iBall Andi 5L Rider Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on iBall Andi 5L Rider
To install the Stock Firmware on iBall Andi 5L Rider , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Andi 5L Rider .
STEP 1: Download and Install the iBall Andi 5L Rider USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your iBall Andi 5L Rider device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iBall Andi 5L Rider to your system using the USB cable and , press any button other than power button so that your system will detect your iBall Andi 5L Rider Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iBall Andi 5L Rider and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iBall Andi 5L Rider using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing iBall Andi 5L Rider Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT iBall Andi 5L Rider:If you would like to know how to root your iBall Andi 5L Rider android device, drop a comment below. We will share the tutorial for your device as quickly as possible .