These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Slide Biomate S9805 (Original firmware) , If you searching for the iBall Slide Biomate S9805 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Slide Biomate S9805 , Here you can download the Official iBall Slide Biomate S9805 Stock Firmware ROM (flash file) on your Computer
Download iBall Slide Biomate S9805 Stock Rom (Original firmware)
Requirements: Your iBall Slide Biomate S9805 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: iBall_Slide_Biomate_S9805_V11_MT6580_20160822-[flash-file.net].zip
Flash File Size: 1.1 GB
ROM Android Version: 5.1
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on iBall Slide Biomate S9805
To install the Stock Firmware on iBall Slide Biomate S9805 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Slide Biomate S9805 .
STEP 1: Download and Install the iBall Slide Biomate S9805 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your iBall Slide Biomate S9805 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iBall Slide Biomate S9805 to your system using the USB cable and , press any button other than power button so that your system will detect your iBall Slide Biomate S9805 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iBall Slide Biomate S9805 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iBall Slide Biomate S9805 using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing iBall Slide Biomate S9805 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT iBall Slide Biomate S9805:If you would like to know how to root your iBall Slide Biomate S9805 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .