Home / IMO / IMO Light S50

How To Flash Stock Rom Firmware On IMO Light S50

These are the instructions to download Flash or install Stock Firmware (ROM) on IMO Light S50 (Original firmware) , If you searching for the IMO Light S50 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on IMO Light S50 , Here you can download the Official IMO Light S50Stock Firmware ROM (flash file) on your Computer .

DownloadIMO Light S50 Stock Rom (Original firmware)

Requirements: Your IMO Light S50 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: IMO_Light_S50_MT6572_140924-[flash-file.net].zip
Flash File Size: 402 MB

Download Flash File

How to Flash Stock Firmware ROM on IMO Light S50

To install the Stock Firmware on IMO Light S50 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on IMO Light S50 .

STEP 1: Download and Install the IMO Light S50 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your IMO Light S50 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your IMO Light S50 to your system using the USB cable and , press any button other than power button so that your system will detect your IMO Light S50 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your IMO Light S50 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your IMO Light S50 using SP Flash Tool.

Keep in mind:

[*] IMO Light S50 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing IMO Light S50 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT IMO Light S50:If you would like to know how to root your IMO Light S50 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

IMO Discovery II

These are the instructions to download Flash or install Stock Firmware (ROM) on IMO Discovery …

Leave a Reply

Your email address will not be published. Required fields are marked *