These are the instructions to download Flash or install Stock Firmware (ROM) on iNew U1 (Original firmware) , If you searching for the iNew U1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iNew U1 , Here you can download the Official iNew U1 Stock Firmware ROM (flash file) on your Computer.
DownloadiNew U1 Stock Rom (Original firmware)
Requirements: Your iNew U1 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: iNew_U1_MT6572_4.4.2-[flash-file.net].zip
Flash File Size: 623 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on iNew U1
To install the Stock Firmware on the iNew U1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iNew U1 .
STEP 1: Download and Install the iNew U1 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your iNew U1 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iNew U1 to your system using the USB cable and , press any button other than power button so that your system will detect your iNew U1 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iNew U1 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iNew U1 using SP Flash Tool.
Keep in mind:
[*] iNew U1 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing iNew U1 Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT iNew U1:If you would like to know how to root your iNew U1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .