Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Infinix Hot 2 X510 Clone (Original firmware) , If you searching for the Infinix Hot 2 X510 Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Infinix Hot 2 X510 Clone , Here you can download the Official Infinix Hot 2 X510 Clone Stock Firmware ROM (flash file) on your Computer.
DownloadInfinix Hot 2 X510 Clone Stock Rom (Original firmware)
Requirements: Your Infinix Hot 2 X510 Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Infinix_Hot_2_X510_Clone_MT6572_V1_04082016-[flash-file.net].zip
Flash File Size: 510 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Infinix_Hot_2_X510_Clone_SP7731CEB_V05_20160425_5.1_SPD-[flash-file.net].zip
Flash File Size: 824 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Infinix Hot 2 X510 Clone
To install the Stock Firmware on Infinix Hot 2 X510 Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Infinix Hot 2 X510 Clone .
STEP 1: Download and Install the Infinix Hot 2 X510 Clone USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Infinix Hot 2 X510 Clone device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Infinix Hot 2 X510 Clone to your system using the USB cable and , press any button other than power button so that your system will detect your Infinix Hot 2 X510 Clone Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Infinix Hot 2 X510 Clone and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Infinix Hot 2 X510 Clone using SP Flash Tool.
Keep in mind:
[*] Infinix Hot 2 X510 Clone Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Infinix Hot 2 X510 Clone Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Infinix Hot 2 X510 Clone Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Infinix Hot 2 X510 Clone:If you would like to know how to root your Infinix Hot 2 X510 Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
