Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Innjoo Fire Pro (Original firmware) , If you searching for the Innjoo Fire Pro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Innjoo Fire Pro , Here you can download the Official Innjoo Fire Pro Stock Firmware ROM (flash file) on your Computer
Download Innjoo Fire Pro Stock Rom (Original firmware)
Requirements: Your Innjoo Fire Pro Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Innjoo_Fire_Pro_5.0_V1_20150708_MT6735-[flash-file.net].zip
Flash File Size: 871 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Innjoo Fire Pro
To install the Stock Firmware on Innjoo Fire Pro , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Innjoo Fire Pro .
STEP 1: Download and Install the Innjoo Fire Pro USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Innjoo Fire Pro device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Innjoo Fire Pro to your system using the USB cable and , press any button other than power button so that your system will detect your Innjoo Fire Pro Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Innjoo Fire Pro and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Innjoo Fire Pro using SP Flash Tool.
Keep in mind:
[*] Innjoo Fire Pro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Innjoo Fire Pro Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Innjoo Fire Pro:If you would like to know how to root your Innjoo Fire Pro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
