These are the instructions to download Flash or install Stock Firmware (ROM) on Innjoo Note E (Original firmware) , If you searching for the Innjoo Note E Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Innjoo Note E , Here you can download the Official Innjoo Note E Stock Firmware ROM (flash file) on your Computer
Download Innjoo Note E Stock Rom (Original firmware)
Requirements: Your Innjoo Note E Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Innjoo_Note_E_V1_20141125_4.4-[flash-file.net].zip
Flash File Size: 596 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Innjoo Note E
To install the Stock Firmware on Innjoo Note E , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Innjoo Note E .
STEP 1: Download and Install the Innjoo Note E USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Innjoo Note E device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
![Guide To flash Official Stock ROM On Android Device](https://flash-guide.com/wp-content/uploads/2018/04/sptool-techsultan-2.png)
![Guide To flash Official Stock ROM On Android Device](https://flash-guide.com/wp-content/uploads/2018/04/2.gif)
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process.
STEP 9: After completed all the above steps, connect your Innjoo Note E to your system using the USB cable and , press any button other than power button so that your system will detect your Innjoo Note E Device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Innjoo Note E and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Innjoo Note E using SP Flash Tool.
Keep in mind:
[*] Innjoo Note E Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Innjoo Note E Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Innjoo Note E:If you would like to know how to root your Innjoo Note E android device, drop a comment below. We will share the tutorial for your device as quickly as possible .