These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua i15 (Original firmware) , If you searching for the Intex Aqua i15 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Intex Aqua i15 , Here you can download the Official Intex Aqua i15 Stock Firmware ROM (flash file) on your Computer
Download Intex Aqua i15 Stock Rom (Original firmware)
Requirements: Your Intex Aqua i15 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Intex_Aqua_i15_v07-[flash-file.net].zip
Flash File Size: 402 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Intex Aqua i15
To install the Stock Firmware on Intex Aqua i15 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Intex Aqua i15 .
STEP 1: Download and Install the Intex Aqua i15 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Intex Aqua i15 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Intex Aqua i15 to your system using the USB cable and , press any button other than power button so that your system will detect your Intex Aqua i15 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Intex Aqua i15 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Intex Aqua i15 using SP Flash Tool.
Keep in mind:
[*] Intex Aqua i15 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Intex Aqua i15 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Intex Aqua i15:If you would like to know how to root your Intex Aqua i15 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .