Home / Intex / Intex Aqua Sense 5.0

How To Flash Stock Rom Firmware On Intex Aqua Sense 5.0

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua Sense 5.0 (Original firmware) , If you searching for the Intex Aqua Sense 5.0 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Intex Aqua Sense 5.0 , Here you can download the Official Intex Aqua Sense 5.0 Stock Firmware ROM (flash file) on your Computer

Download Intex Aqua Sense 5.0 Stock Rom (Original firmware)

Requirements: Your Intex Aqua Sense 5.0 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Intex_Aqua_Sense_5.0_V02_Indian-[flash-file.net].zip
Flash File Size: 371 MB
Flash Tool Link: SPD Flash Tool

Download Flash File


Flash File Name: Intex_Aqua_Sense_5.0_V11_Indian_Ser-[flash-file.net].zip
Flash File Size: 380 MB
Flash Tool Link: SPD Flash Tool

Download Flash File


Flash File Name: Intex_Aqua_Sense_5.0_V16_Indian_SER-[flash-file.net].zip
Flash File Size: 366 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Intex Aqua Sense 5.0

To install the Stock Firmware on Intex Aqua Sense 5.0 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Intex Aqua Sense 5.0 .

Step 1: Download and Install Intex Aqua Sense 5.0 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Intex Aqua Sense 5.0 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Intex Aqua Sense 5.0 Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Intex Aqua Sense 5.0 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Intex Aqua Sense 5.0 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Intex Aqua Sense 5.0 using Spreadtrum Upgrade Tool. Once your Intex Aqua Sense 5.0 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Intex Aqua Sense 5.0 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Intex Aqua Sense 5.0 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Intex Aqua Sense 5.0 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Intex Aqua Sense 5.0:If you would like to know how to root your Intex Aqua Sense 5.0 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Intex Aqua V3G

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua …

Leave a Reply

Your email address will not be published. Required fields are marked *