Home / Intex / Intex Turbo Selfie 18

How To Flash Stock Rom Firmware On Intex Turbo Selfie 18

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Turbo Selfie 18 (Original firmware) , If you searching for the Intex Turbo Selfie 18 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Intex Turbo Selfie 18 , Here you can download the Official Intex Turbo Selfie 18 Stock Firmware ROM (flash file) on your Computer

Download Intex Turbo Selfie 18 Stock Rom (Original firmware)

Requirements: Your Intex Turbo Selfie 18 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Intex_Turbo_Selfie_18_V03_India_SER_SPD-[flash-file.net].zip
Flash File Size: 4 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Intex Turbo Selfie 18

To install the Stock Firmware on Intex Turbo Selfie 18 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Intex Turbo Selfie 18 .

Step 1: Download and Install Intex Turbo Selfie 18 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Intex Turbo Selfie 18 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:How To Flash Stock Rom Firmware On Intex Turbo Selfie 18 Step 4: Now, open UpgradeDownload.exe.How To Flash Stock Rom Firmware On Intex Turbo Selfie 18 Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Intex Turbo Selfie 18 Device to the computer (make sure your Android Device is switch off).

How To Flash Stock Rom Firmware On Intex Turbo Selfie 18

Step 6: Once your Intex Turbo Selfie 18 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).How To Flash Stock Rom Firmware On Intex Turbo Selfie 18 Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

How To Flash Stock Rom Firmware On Intex Turbo Selfie 18

Step 8: During the flashing process your Intex Turbo Selfie 18 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. How To Flash Stock Rom Firmware On Intex Turbo Selfie 18 How To Flash Stock Rom Firmware On Intex Turbo Selfie 18

Step 9: Now you have successfully flashed your Intex Turbo Selfie 18 using Spreadtrum Upgrade Tool. Once your Intex Turbo Selfie 18 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Intex Turbo Selfie 18 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Intex Turbo Selfie 18 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Intex Turbo Selfie 18 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Intex Turbo Selfie 18:If you would like to know how to root your Intex Turbo Selfie 18 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Intex Aqua Star L

Intex Aqua Star L

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua …

Leave a Reply

%d bloggers like this: