These are the instructions to download Flash or install Stock Firmware (ROM) on iPhone 6 Plus Clone (Original firmware) , If you searching for the iPhone 6 Plus Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iPhone 6 Plus Clone , Here you can download the Official iPhone 6 Plus Clone Stock Firmware ROM (flash file) on your Computer
Download iPhone 6 Plus Clone Stock Rom (Original firmware)
Requirements: Your iPhone 6 Plus Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: iPhone_6_Plus_Clone_MT6572_4.2.2_ALPS.JB3.MP.V1.38-[flash-file.net].zip
Flash File Size: 273 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: iPhone_6_Plus_Clone_MT6582_4.4_ALPS.JB5.MP.V1.13-[flash-file.net].zip
Flash File Size: 428 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: iPhone_6_Plus_MT6571_26032015_4.2.2-[flash-file.net].zip
Flash File Size: 232 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on iPhone 6 Plus Clone
To install the Stock Firmware on iPhone 6 Plus Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iPhone 6 Plus Clone .
STEP 1: Download and Install the iPhone 6 Plus Clone USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your iPhone 6 Plus Clone device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iPhone 6 Plus Clone to your system using the USB cable and , press any button other than power button so that your system will detect your iPhone 6 Plus Clone Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iPhone 6 Plus Clone and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iPhone 6 Plus Clone using SP Flash Tool.
Keep in mind:
[*] iPhone 6 Plus Clone Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing iPhone 6 Plus Clone Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT iPhone 6 Plus Clone:If you would like to know how to root your iPhone 6 Plus Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .