These are the instructions to download Flash or install Stock Firmware (ROM) on iPhone 6S Plus Clone (Original firmware) , If you searching for the iPhone 6S Plus Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iPhone 6S Plus Clone , Here you can download the Official iPhone 6S Plus Clone Stock Firmware ROM (flash file) on your Computer
Download iPhone 6S Plus Clone Stock Rom (Original firmware)
Requirements: Your iPhone 6S Plus Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: iPhone_6S_Plus_MT6572_4.2.2_ALPS.JB3.MP.V1-[flash-file.net].zip
Flash File Size: 313 MB
ROM Android Version: 4.2.2
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on iPhone 6S Plus Clone
To install the Stock Firmware on iPhone 6S Plus Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iPhone 6S Plus Clone .
STEP 1: Download and Install the iPhone 6S Plus Clone USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your iPhone 6S Plus Clone device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your iPhone 6S Plus Clone to your system using the USB cable and , press any button other than power button so that your system will detect your iPhone 6S Plus Clone Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iPhone 6S Plus Clone and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your iPhone 6S Plus Clone using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing iPhone 6S Plus Clone Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT iPhone 6S Plus Clone:If you would like to know how to root your iPhone 6S Plus Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .