Home / Irbis / Irbis SP454

How To Flash Stock Rom Firmware On Irbis SP454

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP454 (Original firmware) , If you searching for the Irbis SP454 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Irbis SP454 , Here you can download the Official Irbis SP454Stock Firmware ROM (flash file) on your Computer .

DownloadIrbis SP454 Stock Rom (Original firmware)

Requirements: Your Irbis SP454 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Irbis_SP454_MT6580_v07_21072017-[flash-file.net].zip
Flash File Size: 1 GB

Download Flash File

How to Flash Irbis SP454

To install the Stock Firmware on Irbis SP454 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Irbis SP454 .

STEP 1: Download and Install the Irbis SP454 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Irbis SP454 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Irbis SP454 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Irbis SP454How To Flash Stock Rom Firmware On Irbis SP454

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Irbis SP454 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Irbis SP454 STEP 9: After completed all the above steps, connect your Irbis SP454 to your system using the USB cable and , press any button other than power button so that your system will detect your Irbis SP454 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Irbis SP454 How To Flash Stock Rom Firmware On Irbis SP454 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Irbis SP454 and switch it ON.How To Flash Stock Rom Firmware On Irbis SP454How To Flash Stock Rom Firmware On Irbis SP454Congratulations, Now you have successfully flashed the stock firmware on your Irbis SP454 using SP Flash Tool.

Keep in mind:

[*] Irbis SP454 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Irbis SP454 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Irbis SP454:If you would like to know how to root your Irbis SP454 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Irbis SP455

Irbis SP455

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP455 …

Leave a Reply

%d bloggers like this: