Home / Irbis / Irbis TZ897

How To Flash Stock Rom Firmware On Irbis TZ897

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis TZ897 (Original firmware) , If you searching for the Irbis TZ897 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Irbis TZ897 , Here you can download the Official Irbis TZ897Stock Firmware ROM (flash file) on your Computer .

DownloadIrbis TZ897 Stock Rom (Original firmware)

Requirements: Your Irbis TZ897 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Irbis_TZ897_MT6737M_v05_14082018-[flash-file.net].zip
Flash File Size: 955 MB

Download Flash File

How to Flash Irbis TZ897

To install the Stock Firmware on Irbis TZ897 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Irbis TZ897 .

STEP 1: Download and Install the Irbis TZ897 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Irbis TZ897 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Irbis TZ897 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Irbis TZ897How To Flash Stock Rom Firmware On Irbis TZ897

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Irbis TZ897 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Irbis TZ897 STEP 9: After completed all the above steps, connect your Irbis TZ897 to your system using the USB cable and , press any button other than power button so that your system will detect your Irbis TZ897 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Irbis TZ897 How To Flash Stock Rom Firmware On Irbis TZ897 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Irbis TZ897 and switch it ON.How To Flash Stock Rom Firmware On Irbis TZ897How To Flash Stock Rom Firmware On Irbis TZ897Congratulations, Now you have successfully flashed the stock firmware on your Irbis TZ897 using SP Flash Tool.

Keep in mind:

[*] Irbis TZ897 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Irbis TZ897 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Irbis TZ897:If you would like to know how to root your Irbis TZ897 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Irbis SP455

Irbis SP455

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP455 …

Leave a Reply

%d bloggers like this: