Home / Jivi / Jivi Revolution TNT3

How To Flash Stock Rom Firmware On Jivi Revolution TNT3

These are the instructions to download Flash or install Stock Firmware (ROM) on Jivi Revolution TNT3 (Original firmware) , If you searching for the Jivi Revolution TNT3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Jivi Revolution TNT3 , Here you can download the Official Jivi Revolution TNT3 Stock Firmware ROM (flash file) on your Computer

Download Jivi Revolution TNT3 Stock Rom (Original firmware)

Requirements: Your Jivi Revolution TNT3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Jivi_Revolution_TNT3_V13_07122017_SPD-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Jivi Revolution TNT3

To install the Stock Firmware on Jivi Revolution TNT3 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Jivi Revolution TNT3 .

STEP 1: Download and Install the Jivi Revolution TNT3 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Jivi Revolution TNT3 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Jivi Revolution TNT3 to your system using the USB cable and , press any button other than power button so that your system will detect your Jivi Revolution TNT3 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Jivi Revolution TNT3 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Jivi Revolution TNT3 using SP Flash Tool.

Keep in mind:

[*] Jivi Revolution TNT3 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Jivi Revolution TNT3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Jivi Revolution TNT3:If you would like to know how to root your Jivi Revolution TNT3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Jivi Prime P390

These are the instructions to download Flash or install Stock Firmware (ROM) on Jivi Prime …

Leave a Reply

Your email address will not be published. Required fields are marked *