Home / Karbonn / Karbonn A109

How To Flash Stock Rom Firmware On Karbonn A109

These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn A109 (Original firmware) , If you searching for the Karbonn A109 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Karbonn A109 , Here you can download the Official Karbonn A109 Stock Firmware ROM (flash file) on your Computer

Download Karbonn A109 Stock Rom (Original firmware)

Requirements: Your Karbonn A109 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Karbonn_A109_v1003_20150612-[flash-file.net].zip
Flash File Size: 325 MB

Download Flash File


Flash File Name: Karbonn_A109_v1007-[flash-file.net].zip
Flash File Size: 224 MB

Download Flash File


Flash File Name: Karbonn_A109_v1011-[flash-file.net].zip
Flash File Size: 224 MB

Download Flash File

How to Flash Stock Firmware ROM on Karbonn A109

To install the Stock Firmware on Karbonn A109 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Karbonn A109 .

Step 1: Download and install the RDA USB Drivers on your Computer. If RDA Drivers are already installed on your computer then Skip this Step. USB Logo Step 2: Download and extract Multi IEdownload Tool on your computer. After extracting, you will be able to see the following files: Multi_IEdownload_Files Step 3: Now, Open Multi_IEdownload_eng.exe. Multi_IEdownload Step 4: Once Multi IEdownload Tool is launched, you will be able to see the following screen: Step 5: Now, Click on the browse button and locate the RDA Bin file from your computer. Step 6: Now, connect your Karbonn A109 to the computer (make sure Karbonn A109 is power off and battery is not removed). Step 7: Now, click on the Start All button to begin the flashing process. Step 8: Flashing process will take few minutes to flash the firmware on your Karbonn A109. Once flashing is completed you will be able to see the success message on the screen.

Congratulations, Now you have successfully flashed the stock firmware on your Karbonn A109 using Multi IEdownload Tool

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Karbonn A109 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Karbonn A109:If you would like to know how to root your Karbonn A109 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Karbonn A6 Turbo

These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn A6 …

Leave a Reply

Your email address will not be published.